New unique interchangeable pole floats
Change your float .... Not your rig.
Our new pole floats and weights allow you to move up or down in float and weight size with out changing between rigs.
The float body is made from a high quality foam, with a light, thin metal rod running thought the centre of body and into the bottom of the tip, the rest of the red/yellow tip is completely hollow.
The benefit of our float is it will save you money on fixed float rigs.
All you have to do is make up as many rig variations as you like and keep them on winders.
Without floats or weights.
The only thing you need to leave on your rig is small pieces of rubber provided for your float and weights provided.
“For one set of Three Floats”
Making up a Rig using the No1 Float, attach the stem, then hold the float in your left had with the eye facing to the right, take hold of the line above the float and make a loop with the line from the pole under the line to the float, place the loop over the tip, slide it down and pull into the eye, release the loop and tighten the line above the float, the float is locked on, shot the float as required.
Disconnect the rig and remove the float and stem rubbers.
Thread onto the rig two pieces of stem rubber, store without a float. Make up as many variations as you wish copying the number one rig,
to change floats hold the float as before, draw out the line below the eye then take hold of the line above the eye and draw the two lines together, this forms a loop, wind the loop out of the eye, change the float
Set contains:
3 of our own floats weight are
4x10 4x12 and 4x14.
3 of our own floats weight are
4x16 4x18 and 4x20.
3 of our own floats weight are
4 x 18 4 x 20 4 x 1g .
Enough rubber tubing to last over a year.
